Hi,
There was a post a while ago on getting a Cedrus response box to work with DirectRT. I'm trying to get my own Cedrus RB-730 box to work with MediaLab, but so far there has been no success.
I was able to open up hyperterminal and see characters corresponding to the response box. So when I pressed 1, there was 1 on the hyper term screen etc.
After this, I tried using the IO test tool on COM3 (the response box is actually a USB device but it shows up as COM3 in the device manager). I entered COM3 as 1000 in the IOtest, but there was no feedback from the SRBox.
I also created a comport.txt file with the following text, but MediaLab does not seem to recognize the key presses from the response box.
comPort, baudRate, parity, dataBit,stopBit
3,19200,n,8,1
inputcode (1-255),responsevalue(1-12)
1,1
2,2
3,3
4,4
5,5
6,6
Any help on how I could get the response box to work with media lab would be greatly appreciated.
Thanks,
Akr.