Empirisoft Support

    Welcome to Empirisoft Support
Results 1 to 4 of 4

Thread: Error 9 problem: error messages appearing in TrackPerformance.txt (case 34536)

  1. #1
    Join Date
    Feb 2014
    Posts
    15

    Error 9 problem: error messages appearing in TrackPerformance.txt (case 34536)

    To whom this may concern:
    I am currently trying to use DT 2016 to display three images in a row, with the second one either being target or foil, and collect RT for each trial. A standard Go-No-Go Task.
    My team came up with this solution (see attached file), which seems to run fine, but produces error message and stores in TrackPerformance.txt under DirectRT folder. Here's how it looks like:

    Subject 999, 2019-05-13, 오후 3:57:41, Finished. 0 Errors/Warnings.


    Subject 999, 2019-05-13, 15:57:55.81 pm, v2018.1.107, Initial Display: 1920x1080, 32-bit colour, 60hz or 16.67ms/screen
    Elapsed Time: 424045656ms, block 0, trial 0, stim 2, Error 445, Object doesn't support this action--may be a problem switching to the requested display settings (resolution and/or color depth), on line 440, during Init of Form DDFullScreen
    Subject 999, 2019-05-13, 오후 3:57:59, v2018.1.107, Session Display: 1920x1080, 32-bit colour, 60hz or 16.67ms/screen
    Elapsed Time: 2840ms, block 1, trial 2, stim 1, Error 9, Subscript out of range, on line 200, during FlipScreen of Form DDFullScreen
    Elapsed Time: 3609ms, block 1, trial 3, stim 1, Error 9, Subscript out of range, on line 200, during FlipScreen of Form DDFullScreen
    .....(zip).....
    Elapsed Time: 7270ms, block 1, trial 8, stim 1, Error 9, Subscript out of range, on line 200, during FlipScreen of Form DDFullScreen
    Elapsed Time: 8042ms, block 1, trial 9, stim 1, Error 9, Subscript out of range, on line 200, during FlipScreen of Form DDFullScreen
    Subject 999, 2019-05-13, 오후 3:58:11, Finished. 9 Errors/Warnings.


    My question would be:
    1. Should I be concerned? The RT Log seems fine at this point and no pop-up windows complaining about errors yet.
    2. If I should be concerned... is there any way to improve/fix this issue?

    Cheers,

    "Raymond" Byungho PARK
    New DirectRT user (since 2019)
    Attached Files Attached Files
    Last edited by jason_reed; 05-13-2019 at 10:06 AM.

  2. #2
    Join Date
    Feb 2013
    Posts
    1,093
    A outward bound TTL signal must be followed by another stimulus—it can be any but the last stimulus on a trial. Try adding a blank stimulus (~ in the stim cell displayed for 0 seconds in the corresponding time cell) on the trials in your current .csv file where you are sending a ttl signal. Then try running it again to see if the error messages persist.
    Jason Reed
    Empirisoft Software Support Specialist

  3. #3
    Join Date
    Feb 2014
    Posts
    15

    Issue resolved.

    Thank you -- this issue has been resolved now.

  4. #4
    I don't think you can output TTL using the actual serial port, as that is RS-232, not TTL logic levels. If you're using the serial port, you'll need a converter, like this.

Similar Threads

  1. Error 53 and Error 5 in TrackPerformance.txt file (case 15784)
    By jason_reed in forum DirectRT v2018: Troubleshooting
    Replies: 2
    Last Post: 09-02-2014, 05:01 PM
  2. Error messages after showing a video clip (case 2716)
    By sooyearn in forum DirectRT v2018: Troubleshooting
    Replies: 1
    Last Post: 04-29-2014, 10:43 AM
  3. Problem with ip-license / dll-error message
    By Bowman in forum DirectRT Older Versions: Troubleshooting
    Replies: 1
    Last Post: 01-31-2011, 06:45 PM
  4. Video Playback Problem fixed but RenderOutputPins Error
    By Kevin L. in forum MediaLab Older Versions: Troubleshooting
    Replies: 9
    Last Post: 01-11-2011, 12:07 PM
  5. Data error messages at end of session
    By skimel in forum MediaLab Older Versions: Troubleshooting
    Replies: 1
    Last Post: 04-26-2010, 03:55 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •