Empirisoft Support

    Welcome to Empirisoft Support
Results 1 to 8 of 8

Thread: Change Blindness Question

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Change Blindness Question

    I am running a change blindness study in which the subject must press the spacebar when s/he detects a change between two images, so I am alternating between two stimuli (560ms) and a mask (80ms). I want the subject to be able to press the spacebar at any time and jump to a free response trial to answer what changed before moving onto the next trial. I'm having problems getting this to work. At first I had the time column read rt:57>3 [the free response], 560, but after looking at the forums, I realized that this waits for the subject to press the spacebar. I'm unsure what to do here; should I have each time include a no response valid condition? The online manual suggests using ! as a means of automatic continuation, but doesn't say how to actually transcribe that (rt:57, 560!? rt:57, 0-560!?). How can I have the subject jump out of the stimuli presentation portion and into the free response? I am attaching my most current .csv file, as well as giving you access to the spreadsheet I'm using on google docs. Thanks in advance for your help!

  2. #2
    Join Date
    Nov 2005
    Posts
    3,328
    When reading stuff about min-max settings, be sure to note that it's often making reference to the "min-max" column in your style (.drt) file.

    But that said, I'm also trying to understand exactly what you're doing before trying to offer a suggestion. From you you wrote, it sounds to me like you are measuring the RT to detect a change from one picture to another. But when I looked at your input file, I noticed you are repeating pic1 and pic2 over and over within the single trial. Is this intentional?

  3. #3
    The reason the stim repeat so much is that the paradigm entails switching between two pictures and a blank screen really quickly to create a flicker effect. Since DirectRT doesn't use recursion, I'm just going to have the two pictures and mask in a row such that the subject can jump to a response row at any time. In terms of my old problem, where the screen would not advance until a button press, I think changing the style so that the eligible response times overlap with the time the stimuli is presented will do the trick, though please correct me if I'm wrong.

  4. #4
    Join Date
    Nov 2005
    Posts
    3,328
    Depends--play with it and see how it works for you. In previous situations like this I have sometimes seen users prefer an animation approach--combing the alternating images into a single animated gif or avi. Makes the input file a lot simpler and you just take a single RT that skips or jumps wherever you like (if you would even need that).

  5. #5
    Join Date
    Mar 2009
    Posts
    2

    Change Blindess Coding

    Hi Jarvis and Nick,

    I was just wondering how the change detection coding issue was resolved. I too am trying to program a change detection experiement and have run into some issues. I can get the images to cycle through on screen (img1, blank, img2, blank, img1, blank, img2, etc) but I cannot figure out how to get the cycle to stop when the participant makes a response (spacebar). Basically, I want the images to cycle through for 300ms each and stop cycling when the spacebar is stuck and record the time from the initial presentation of the first picture to the response. I know Jarvis recommended using an animation for this sequence but I was wondering if either of you had figured it out using just the aternating images. Any coding help would be greatly appreciated!

  6. #6
    Join Date
    Aug 2011
    Posts
    1

    note about automatic continuation

    I didn't notice anyone else having posted this issue but through trial and error I have determined that if you want to use automatic continuation to end a trial that has more upcoming stimuli after a certain periof of no response, you must put two exclamation marks after your MinMax range in the styles file (e.g., 0-2000!!) AND two exclamation marks after the -1 in your rt statement (e.g., rt:-1!!,57).

    This allowed me to skip to the next trial if there was no response after 2 seconds but if the spacebar was pushed before 2 seconds was up then it proceeded to the remaining stimuli associated with that trial.

    Not sure why this works or if this actually helps you, but it hopefully explains the transcription issue - I was frustrated by this also.

    Cheers.

Similar Threads

  1. change blindness
    By TLML in forum DirectRT Older Versions: How Do I...
    Replies: 3
    Last Post: 01-30-2008, 05:56 PM
  2. change wording in dialog box
    By irwin in forum MediaLab Older Versions: General Questions
    Replies: 3
    Last Post: 08-22-2007, 12:53 PM
  3. Data not lining up after wording change
    By beck11 in forum MediaLab Older Versions: Troubleshooting
    Replies: 2
    Last Post: 06-18-2007, 01:05 PM
  4. Can I change the color of the buttons?
    By jarvis24 in forum MediaLab Older Versions: How Do I...
    Replies: 1
    Last Post: 01-18-2006, 02:03 PM
  5. Change message location
    By laumh in forum MediaLab Older Versions: How Do I...
    Replies: 1
    Last Post: 12-15-2005, 04:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •