Empirisoft Support

    Welcome to Empirisoft Support

Search:

Type: Posts; User: jason_reed

Page 1 of 10 1 2 3 4

Search: Search took 0.03 seconds.

  1. Please see if the touchscreen example that came...

    Please see if the touchscreen example that came with DirectRT works correctly with your copy of DirectRT. You can find it to run in the DirectRT folder at DirectRT\Samples\6 -...
  2. Thanks for the input file. Looking at it makes...

    Thanks for the input file. Looking at it makes me wonder about a few things to try in this order.

    First, please clarify exactly where this COM 1 port value is when you said "if there is 1 in the...
  3. I'd be happy to look at your .csv input file....

    I'd be happy to look at your .csv input file. Please either post it here or send it to support@empirisoft.com and reference case 28611.
  4. I would be happy to try and run your files on my...

    I would be happy to try and run your files on my copy of DirectRT to see what I can do. Please either upload a copy of all the files needed to run it in DirectRT here or send them to...
  5. Your file does not have all of the columns...

    Your file does not have all of the columns required to run it in DirectRT. You are missing all of the columns that need to come before the first stim column, namely (in order from left to right in...
  6. Replies
    1
    Views
    80

    Take a look at this thread from the Empirisoft...

    Take a look at this thread from the Empirisoft Support forums:

    http://www.empirisoft.com/support/showthread.php/4735-Simulating-Chat-room-Instant-messaging-(case-493)?highlight=chat
  7. Have you tried the DirectRT feature of using open...

    Have you tried the DirectRT feature of using open ended responses as stimuli as described here in the DirectRT manual:

    ...
  8. I would be happy to take a look at your files to...

    I would be happy to take a look at your files to see if I can replicate and diagnose the problem. Please upload all the files to a reply on this forum thread or send them to support@empirisoft.com...
  9. Unfortunately, using a USB adapter would not...

    Unfortunately, using a USB adapter would not work. Windows still obscures actual pin access when using a USB / LPT adapter. You need to use a parallel port card.
  10. Hello, DirectRT does not currently have a...

    Hello,

    DirectRT does not currently have a feature that allows for actions based on real-time calculations of responses. So DirectRT cannot be programmed to use information like the total number of...
  11. Replies
    3
    Views
    274

    Bianca, As mentioned before, the data only...

    Bianca,

    As mentioned before, the data only gets written at the end of a MediaLab session, so there isn't any way to save responses until all of the files in the .exp file for a session are run.
    ...
  12. Replies
    3
    Views
    274

    MediaLab only creates output files once the .exp...

    MediaLab only creates output files once the .exp file started during a MediaLab session is run to completion. It also only records data for any .que files in the .exp file if the .exp file is run...
  13. Can you please clarify what keyboard entry is...

    Can you please clarify what keyboard entry is supposed to trigger the green button? I ask because I only used your original .csv file to make the one trial file I sent you, so it's the response...
  14. Here are a few things that you can try on the...

    Here are a few things that you can try on the computer on which you are having trouble running your files on DirectRT.

    1) First, change the screen size setting under the Options button of your...
  15. Replies
    1
    Views
    138

    Please send me a copy of the IATs-both those that...

    Please send me a copy of the IATs-both those that work and are broken-and the files needed to run them on my copy of DirectRT. You can either upload them here or send them to me directly at...
  16. The "flash" is a normal part of DirectRT...

    The "flash" is a normal part of DirectRT functioning as DirectRT ends one trial row of the input file and prepares to present the subsequent trial row. You can try setting the background color of the...
  17. Hi, I'd love to see what files you already...

    Hi,

    I'd love to see what files you already created and try to run them on my copy of DirectRT. Please either upload them here or send them to me directly at support@empirisoft.com (please...
  18. You're quite welcome. We'd love to hear a...

    You're quite welcome. We'd love to hear a follow-up about what computer you purchase and how it works with DirectRT and MediaLab.
  19. DirectRT can randomly select trials from an input...

    DirectRT can randomly select trials from an input file as long as the trials have the same positive nonzero integer in the wgr cell of that row of the input file. You can also select a subset of...
  20. I'm glad that this has been helpful. In regards...

    I'm glad that this has been helpful. In regards to your last response, is it necessary to randomize twice? Randomization of elements two times does not make the elements "more random" after a first...
  21. I will be sure to pass this suggestion to our...

    I will be sure to pass this suggestion to our programmers.
  22. For your file named Exp 2.cv, insert a row after...

    For your file named Exp 2.cv, insert a row after trial 48 in the block (e.g., right after row 50). Use a value of 0 in the wgr cell of this new row. This will make DirectRT present only 48 trials...
  23. Skipping only works with the responses made in...

    Skipping only works with the responses made in whatever single trial is currently being run in a DirectRT session. DirectRT cannot skip or jump based on the input of more than one trial and can only...
  24. When running a .exp file, all parts of that .exp...

    When running a .exp file, all parts of that .exp file must be successfully completed before any data is recorded.
  25. I can't say how MediaLab or DirectRT work...

    I can't say how MediaLab or DirectRT work specifically with the Lenovo Thinkpad X1 because we do not have any direct experience with it. We try to speak to what we have experience with, thus the...
  26. You could use skipping for the response to each...

    You could use skipping for the response to each of the trials in the block. In your example with the three trials, you could set up a skip pattern like this:

    Trial 1

    Correct response = skip to...
  27. Please send me the .que files and other files...

    Please send me the .que files and other files necessary to run them. You can either upload them here or send them to me directly at support@empirisoft.com (please reference case 27293). I'd like to...
  28. If you already have the computer, you should try...

    If you already have the computer, you should try DirectRT on it. We are happy to provide free trials that are good for 21 days of use.

    Just download and install DirectRT from here on the...
  29. I am not aware of anyone who has used either...

    I am not aware of anyone who has used either DirectRT or MediaLab specifically with a Lenovo Thinkpad X1, so I don't know exactly what would happen when using either program. However, it would...
  30. We're sorry to hear that you have experienced...

    We're sorry to hear that you have experienced issues involving loss of data during your use of MediaLab. MediaLab does require that any .que files are successfully run to completion to record the...
  31. Hello Nick, For what you describe, the...

    Hello Nick,

    For what you describe, the appropriate item choice would be to use a custom item. However, the trick is to have html code that allows you to record the amount of time that a mouse...
  32. You should be fine with any business-class...

    You should be fine with any business-class laptop. If you'd like to test the software on any potential new machine, we'd be happy to provide a free trial good for 21 days to try the software. Just...
  33. You should be fine with any business-class...

    You should be fine with any business-class laptop. If you'd like to test the software on any potential new machine, we'd be happy to provide a free trial good for 21 days to try the software. Just...
  34. Replies
    3
    Views
    3,696

    Thank you! We're glad you like it.

    Thank you! We're glad you like it.
  35. Leanne, When using the comport.txt file, the...

    Leanne,

    When using the comport.txt file, the only thing you need between the braces-{}- and angular brackets-<> is the value you want to send. In you example, that should be the value 20, which...
  36. You can use the comport.txt feature to send ttl...

    You can use the comport.txt feature to send ttl signals from MediaLab over a serial port. See the section named "Sending Streams of Serial Data" here in the MediaLab manual:

    ...
  37. It would be helpful if I could see the exact...

    It would be helpful if I could see the exact MediaLab and responses.xls file you have. Please either upload it here or send it to support@empirisoft.com (reference case 26486).
  38. I'd like to take a look at the MediaLab files....

    I'd like to take a look at the MediaLab files. Please either upload them here or send them to support@empirisoft.com (please reference case 24994).
  39. Do you get the same problem if you create the...

    Do you get the same problem if you create the .csv input file from scratch (i.e., not using any copying and pasting)?
  40. Replies
    1
    Views
    2,253

    You can find the online manual for DirectRT 2016...

    You can find the online manual for DirectRT 2016 here:

    http://www.empirisoft.com/directrt/help/_helpcontents.htm
  41. Replies
    3
    Views
    840

    I'd like to see what happens when I run the files...

    I'd like to see what happens when I run the files on my copy of DirectRT. Please either upload all the files I would need here or send them to support@empirisoft.com and reference case 26181.
  42. Hi IRLab, I'd like to see the actual files in...

    Hi IRLab,

    I'd like to see the actual files in question to help me make sure that I know how you are trying to use the skip function. Please either upload them here or send them to...
  43. Hi idamerete! Have you tried changing the...

    Hi idamerete!

    Have you tried changing the settings in the Font and Color menu of MediaLab as described here in the MediaLab manual:
    ...
  44. Hello Eitan, I would like to see a copy of the...

    Hello Eitan,

    I would like to see a copy of the actual .csv input file you use for these joystick commands. Please either upload a copy to this thread or send it to support@empirisoft.com and...
  45. Replies
    3
    Views
    840

    Try a different format for the video files like...

    Try a different format for the video files like .wmv.
  46. To display a large number of words and allow for...

    To display a large number of words and allow for some form of selecting them in MediaLab, you would need to program it in HTML code and then run it as a Custom item in a .que file in MediaLab.

    You...
  47. Hi Kelly, To edit and save any changes to what...

    Hi Kelly,

    To edit and save any changes to what is presented to participants in MediaLab would require you to use HTML code to create the desired stimuli and editing responses. You would then use...
  48. Please tell me the full version number (i.e.,...

    Please tell me the full version number (i.e., 20xx.x.xxx) of your copy of DirectRT. You can find it by opening DirectRT and selecting Help>About DirectRT from the main menu bar.
  49. Try a multiple response item type. You can...

    Try a multiple response item type. You can display one word per answer choice. Each choice that is selected will show a check mark next to it, "highlighting" that it is chosen.
  50. The only important part for the input file that...

    The only important part for the input file that DirectRT runs is that it is in a comma separated value-the .csv-format.

    Exactly how do you copy and paste new rows into the file?
Results 1 to 50 of 500
Page 1 of 10 1 2 3 4